IEC 60352-5:2012 pdfダウンロード

IEC 60352-5:2012 pdfダウンロード。Solderless connections – Part 5: Press-in connections – General requirements, test methods and practical guidance
1 Scope and object
This part of IEC 60352 is applicable to solderless press-in connections for use in telecommunication equipment and in electronic devices employing similar techniques.
The press-in connection consists of a termination having a suitable press-in zone which is inserted into a plated-through hole of a double-sided or multilayer printed board.
Information on materials and data from industrial experience is included in addition to the test procedures to provide electrically stable connections under prescribed environmental conditions.
The object of this part of IEC 60352 is to determine the suitability of press-in connections under mechanical, electrical and atmospheric conditions as specified by the manufacturer of the press-in termination and to provide a means of comparing test results when the tools used to make the connections are of different designs or manufacture.
2 Normative references
The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
IEC 60050(581 ):2008, International Electrotechnical Vocabulary (IEV) – Part 581: Electromechanical components for electronic equipment
IEC 60068-1 :1 988, Environmental testing – Part 1: General and guidance Amendment 1 (1 992)
IEC 60352-1 :1 997, Solderless connections – Part 1: Wrapped connections – General requirements, test methods and practical guidance
IEC 6051 2 (all parts), Connectors for electronic equipment – Tests and measurements
IEC 6051 2-1 -1 00, Connectors for electronic equipment – Tests and measurements – Part 1-100: General – Applicable publications
IEC 61 1 88-5-1 : Printed boards and printed board assemblies – Design and use – Part 5-1:Attachment (land/joint) considerations – Generic requirements
IEC 61 249 (all parts), Materials for printed boards and other interconnecting structures
IEC 62326-4:1 996, Printed boards – Part 4: Rigid multilayer printed boards with interlayer connections – Sectional specification
3 Terms and definitions
For the purposes of this document, the terms and definitions of IEC 60050(581 ) and IEC 6051 2-1 as well as the following apply.
3.1
press-in connection
solderless connection made by inserting a press-in termination into a plated-through hole of a printed board
[IEC 60050-581 : 2008, 581 -03-46]
3.2
press-in termination (press-in post)
termination having a specially shaped zone suitable to provide for a solderless press-in connection
[IEC 60050-581 : 2008, 581 -03-39]
3.2.1
solid press-in termination
press-in termination having a solid press-in zone which behaves primarily rigid and induces a elastoplastic deflection of the through hole
[IEC 60050-581 : 2008, 581 -03-40]
3.2.2
compliant press-in termination
press-in termination having a compliant press-in zone which causes a limited elastoplastic deflection of the through hole and a elastoplastic deformation of the press-in zone
[IEC 60050-581 : 2008, 581 -03-41 , modified]
3.3
press-in zone
specially shaped section of a press-in termination which is suitable to provide for the press-in connection
[IEC 60050-581 : 2008, 581 -03-52]
3.4
termination insertion tool
device used to insert press-in terminations or components equipped with press-in terminations into a printed board
[IEC 60050-581 : 2008, 581 -05-22]